$47.95
Description:
Scorpion 4 Cell-V2 25A Brushless ESC
Technical Details:
The Commander 15V LBEC (Linear Battery Eliminator Circuit) series features a Linear BEC that will convert the voltage from your battery pack to 5.0 volts to power your receiver and servos.
The Commander LBEC will deliver the amps specified on the ESC heat shrink and will operate from 6 to 15 Volts.
The full-featured IR Programming Card allows the user to set the following parameters:
Low Voltage Cut-off (5V to 13.8V at 0.2V increments) no need to select battery type just set the voltage the ESC should work on, by doing this, the ESC will be compatible with any future type of battery designs.
LVC= LOW VOLTAGE CUT: 050 (5V) TO 138(13.8V)
BRK= BRAKE SETTING: 1: NO BRAKE, * 2: VERY SOFT BRAKE, 3: SOFT BRAKE, 4: HARD BRAKE, 5: VERY HARD BRAKE
AIR= ACTIVATE AIRPLANE MODE*
PCT= PROGRAM CUT TYPE (LVC TYPE): 1: CUT 50%*, 2: NO CUT JUST LED WARNING, 3: PULSE WARNING
MAT= MOTOR ACCELERATION TIME DELAY: 1: 0.15 Seconds, 2: 0.3 Seconds*, 3: 0.45 Seconds, 4: 0.7 Seconds, 5: 1.3 Seconds
CAR/B= DISABLED
COP= CURRENT OVERLOAD PROTECTION: 1: PROTECTION ON*, 2: PROTECTION OFF (CHOOSING OPTION 2 WILL VOID WARRANTY)
FREQ= DRIVE FREQUENCY: 1: 8 kHz *
SS= 1: SOFT START WITH OUT GOVERNOR MODE*, 2: SOFT START WITH GOVERNOR
TIM= MOTOR TIMING: 1: AUTO TIMING*, 2: 5 Degrees, 3: 15 Degrees, 4: 20 Degrees, 5: 25 Degrees, 6: 30 Degrees
GOV= GOVERNOR CORRECTOIN: 1: SOFT*, 2: MEDIUM, 3: STRONG
SB= MOTOR STARTING BOOSTER 1: SOFT, 2: MEDIUM, 3: STRONG
SOFT START DURATION: 1. SHORT 10 Seconds, 2: MEDIUM 15 Seconds*, 3: STRONG 20 Seconds
*Factory Default
Specifications:
Weight (Without Connectors) 20.3 g (0.72 oz)
Max Continuous Current 25 Amps
Operating Voltage Range 6 to 15 Volts
Max BEC Output 3 Amps @ 6 V
On Resistance 3.66 mOhms
Size 48 x 26 x 9 mm (1.89 x 1.04 x 0.35 in)
Included in the Box:
1 x Scorpion Commander 15V 25A ESC
1 x Scorpion IR Transmitter (Programming Card)
1 x Scorpion IR Receiver
1 x Instruction Manual
