Schulze Fut-18.149F 2-5 Lipo ESC

Specifications:

Schulze Fut.18.149F 2-5 Lipos Brushless ESC

The future-u is a microprocessor controlled unit developed and manufactured entirely in Germany, designed for brushless and sensorless 3-phase rotary current motors.

All models of the future-u are amongst the world’s smallest, lightest and most capable speed controllers. future-u controllers have the most intelligent, comprehensive software, which means that this speed controller (or governor) is capable of operating virtually any brushless motor currently on the market with optimum efficiency.

The ipsu (intelligent programming system for future-universal) makes it as simple as possible to configure the controller to match any radio control system and operating mode: The transmitter stick travel settings of the wing programs is fully automatic, the operating modes can easily be configured by the DIL-switch.

The integral motor connector system is a feature of all future-u controllers up from 20 A nominal current, and makes it possible to remove the unit for servicing, or for fitting in another model, simply by unplugging the power cables – no soldering is required.

Almost all of this series of future-u controllers are universal types which can be used in model aircraft, helicopters, boats and cars. The “larger” ones include an opto-coupler which ensures minimum possible transfer of interference to your receiver.

Some “larger” versions include a BEC system, and the opto-coupler is by-passed if you use it. However, if you encounter interference problems, the opto-coupler can be re-activated by disconnecting the twin-core BEC lead.

The types with an „F“ in the designation feature a special program for FAI gliders with an abbreviated soft-start, instead of the helicopter program.
future-18.149F

For 6-18 Ni-Cd resp. Ni-MH cells resp. 2-5 LiPo cells. For motors up to 149A.

Intentional supplied with two 2,5 square-mm cables for each battery pole, which simply leads to two connectors on each battery pole. The result is a higher reliability of the connectors and lower losses in the leads.

All three motor terminals are special solder terminals to guarantee lowest losses and maximum reliability – especially important in a contest.

FAI- instead of helicopter program. Best suited for all applications in cars and wing aircraft, where you will not give away a single millivolt.