Description:
Tonegawa-Seiko SSPS-105, 24V, HiTorque, +/- 90 Servo
Technical Details:
New 12V Servo is also available now.
Quantity Price available upon request. (5 pcs or more)
Because of their different possible configurations, these servos are made TO ORDER.
Delivery approx. 2-3 weeks after order has been placed.
This is Tone Servos flagship model - this hi-power servo has been developed since 1975. The 105 Series is a line-up of models that have met a lot of applications. The bodies are made of die-cast aluminum. Since these models have superior water resistance design, they can also be used under critical conditions. Used in R/C planes having wingspans of over 3 meters or in 1/4-scale radio-controlled model cars.
MTFB 250,000 cycle motor Canon 38 dia. 7-fields
SPECIFICATIONS:
Weight: 780 grs (including 1 meter long connecting wire)
Dimensions: 5.25 x 4.75 x 2.5 inches
Case: aluminum die-cast water resistance allowing splash
Input pulse: +3 to 5v 1.51ms 400 micro second (signal)
Axial angle: 45; 90 & 180 deg. / 400 micro second
Speed: 0.95 sec/90 deg. (std) 0.5 sec/90 deg. (high speed)
Max torque: 380Kg and mid dot;cm (std) 190Kg and mid dot;cm (high speed)
Maximum current: 12v - 9Amp ****** 24v - 4.5Amp
Voltage: DC 12v (24-28v models available)
SSPS 105 24V
24V .. STD (High Torque) .. 1.80 sec/ 90 deg. .. Torque 380 Kg-cm
24V .. HS (High Speed) .. 0.90 sec/ 90 deg. .. Torque 190 Kg-cm
Specific Information:
Drive Method: Gear (B)
Operating Voltage: 12v (C)
Gear Ratio: High Torque (E)
Operating Angle: +/- 45 deg (G)
Starting Torque: 380kg/cm
Drive Method: Gear (B)
Operating Voltage: 12v (C)
Gear Ratio: High Speed (F)
Operating Angle: +/- 90 deg (H)
Starting Torque: 190kg/cm
Drive Method: Gear (B)
Operating Voltage: 12v (C)
Gear Ratio: High Speed (F)
Operating Angle: +/- 180 deg (I)
Starting Torque: 190kg/cm
Operating Voltage: For 24v units use code (D)
Selection Example:
Servo SSPS105-BCFG means: gear drive, 12v, high speed and 45deg operating angle.
Note:
If you want high torque, then it will come as +/-45 degrees only.
If you do want high speed, then you can choose either +/-90 or +/-180 but the torque output will be reduce by 50%
Basically the same applies for the 24V unit.
