BA Magnetic Induction Mini Hi-Speed Ti Gears Servo 26g -

Description:

Blue Arrow Magnetic Induction Mini Hi-Speed Ti Gears Servo 26g - 52.7oz/in

A TRUE innovation on servo technology.Eliminates the use of the potentiometer, thus a perfect centering is obtained at all times.

Technical Details:

Control System: PWM Pulse Width Control
Processor: Digital IC
Required Pulse: 3 to 5 V Peak to Peak Square Wave
Working frequency: 1520 μs /333 Hz
Rotation angle sensor: MAGNETIC INDUCTION
Rotation: Left Rotation: 46, Right Rotation: 46
Voltage: 4.5V to 6.0V
Temperature Range: -20℃ to 60℃
Driver Type: MOSFET
Operating Angle: 45 Deg. one side pulse traveling 400μs
Direction: Clockwise/Pulse Traveling 900μs-2100μs
Pulse Width Scope: 900-2100μs
Neutral pulse: 1500μs
Resolution: Minimum resolution:0.088°/0.9μs
Maximum resolution:0.350°/4μs
Rotational speed of magnet: Maximum 600RPM (r / min)
Magnetic offset: ±10mT
Magnetic input field amplitude: 45 to 75mT
Speed:(No-load ): 0.08sec/ 60° @ 4.8V
0.07sec/ 60° @ 6.0V
Torque:(Stall Full load): 3.80 kg/cm (52.7oz/in) @ 4.8V
4.50 kg/cm (62.4oz/in) @ 6.0V
Idle Current: <0.05 A/ 4.8V <0.05 A/ 6.0V
Running Current: <0.10 A/ 4.8V <0.20 A/ 6.0V
Stall Current: 1.2 A/ 4.8V 1.5 A/ 6.0V
Motor Type: Coreless Motor
Bearings: 3 Ball Bearing
Bearing Type: MR106 (6mmx10mmx2.5mm)
MR06ZZ (6mmx10mmx3mm)
MR74 (4mmx7mmx2mm)
Gear Material: Titanium Gear
Servo case: Nylon
Plug: "J" type
Connector Wire Length: 260.0mm
Connector Wire SPEC: OD1.2mm/30 x 0.08mm 3p x 260mm "J" type
Weight: 26.00 g (0.91oz)
Dimensions (L x W x H): 35.5 x 15.0 x 30.0mm